High-speed machining in SprutCAM
Collision control during toolpath calculation
SprutCAM X takes into account real machine kinematic limitations for initial toolpath calculation. There is no need for postprocessing and separate simulation for collision and axis limits control.
Rest material handling
SprutCAM always keeps the workpiece updated live within the operations sequence to optimize the toolpath and avoid air-cutting.
Every subsequent operation detects the workpiece in the state it was left by the previous operations.
Thus the machine time is kept optimized.
On the screenshot green color is the part itself and orange is the current state of the workpiece.
Rest material handling
SprutCAM always keeps the workpiece updated live within the operations sequence to optimize the toolpath and avoid air-cutting.
Every subsequent operation detects the workpiece in the state it was left by the previous operations.
Thus the machine time is kept optimized.
In the screenshot; green color is the part itself and orange is the current state of the workpiece.
