Tilted working plane (TWP)
g68.2 / cycle800 / plane spatial
Automatic and manual local CS transformation for 3+2 machining
Tool center point management (TCPM)
G43.4 / TRAORI / M128
TCPM mode for continuous 5-axis machining
Ultimate 5-axis programming workflow
Ultimate 5-axis machines programming workflow
Rest material handling
SprutCAM always keeps the workpiece updated live within the operations sequence to optimize the toolpath and avoid air-cutting.
Every subsequent operation detects the workpiece in the state it was left by previous operation.
Thus the machine time is kept optimized.
On the screenshot,the green color is the part itself and orange is the current state of the workpiece.
Ultimate 5-axis machines programming workflow
Machine kinematics consideration
SprutCAM takes into account the machine kinematics with all its limitations when the toolpath is calculated.
The simulation automatically commences in the background immediately after the toolpath is
calculated. The user can avoid any collisions that may occur without having to switch to Simulation mode.
Thus the CNC programming workflow is very streamlined and takes much less time; especially for multi-axis programming.
Ultimate 5-axis programming workflow
Rest material handling
SprutCAM always keeps the workpiece updated live within the operations sequence to optimize the toolpath and avoid air-cutting.
Every subsequent operation detects the workpiece in the state it was left by previous operation.
Thus the machine time is kept optimized.
On the screenshot,the green color is the part itself and orange is the current state of the workpiece.
Ultimate 5-axis programming workflow
Machine kinematics consideration
SprutCAM takes into account the machine kinematics with all its limitations when the toolpath is calculated.
The simulation automatically commences in the background immediately after the toolpath is
calculated. The user can avoid any collisions that may occur without having to switch to Simulation mode.
Thus the CNC programming workflow is very streamlined and takes much less time; especially for multi-axis programming.
Collision control during toolpath calculation
SprutCAM X takes into account real machine kinematic limitations for initial toolpath calculation. There is no need for postprocessing and separate simulation for collision and axis limits control.
5-axis toolpath suite
8 strategies for toolpath control
7 strategies for tool axis control
Special 5-axis solutions
