Meet SprutCAM X
Pioneer in Machine-Aware programming
SprutCAM X demonstrates leadership in the field of computer-aided-manufacturing, specifically focusing on CNC programming software. The concept of Machine-Aware Programming was introduced back in 2001. This innovation carefully addresses machines’ and robots’ capabilities and limitations from the very start of the programming phase. This marks a departure from the conventional approach observed in CAM systems, where these considerations are typically integrated during the simulation of machining or the subsequent postprocessing steps.
The outcome is a streamlined process that obviates the requirement for repetitive reprogramming and re-verification cycles, consequently leading to a notable reduction in the timeframe spanning from the commencement of a project to the culmination of the programming code.
Your CNC Machine digital twin
The MachineMaker app allows you to generate a digital replica of your CNC machine in a matter of minutes. This digital twin is intended for use in programming the CNC machine within the CAD/CAM software SprutCAM X.
Furthermore, MachineMaker features an extensive library of readily available individual components, as well as complete pre-designed digital twins of CNC machines and postprocessors.
Product Highlights
Applications
Technology highlight:
Adaptive SC
This high-speed machining cycle is specifically designed for roughing to substantially decrease cycle times and extend tool life. Its technology automatically regulates chip loads and lateral cutting forces while maintaining the cutter engagement angle and machine axes acceleration within optimal ranges.
With Adaptive SC, the machine can make deeper cuts at higher feedrates, which are also automatically optimized throughout the toolpath for maximum efficiency. In comparison to traditional machining methods, Adaptive SC provides the following benefits:
70%
reduction in cycle time
500%
increase in tool life
Applications
Technology highlight:
Adaptive SC
This high-speed machining cycle is specifically designed for roughing to substantially decrease cycle times and extend tool life. Its technology automatically regulates chip loads and lateral cutting forces while maintaining the cutter engagement angle and machine axes acceleration within optimal ranges.
With Adaptive SC, the machine can make deeper cuts at higher feedrates, which are also automatically optimized throughout the toolpath for maximum efficiency. In comparison to traditional machining methods, Adaptive SC provides the following benefits:
70%
reduction in cycle time
500%
increase in tool life
#PoweredBySprutCAM
#PoweredBySprutCAM
Daily posts from our clients all over the world
Ready to embark on your SprutCAM X journey?
Select your preferred path