Nomura NN32Y-B2 programmed in SprutCAM showreel
Werkzeugwegberechnung und Bearbeitungssimulation vom Typ Langdrehen
Mehrkanal-Funktionen
Sync points setup
Each MTM node works with a separate controller / channel, using its own program.
Therefore, it is necessary to create NC code for each machine controller / channel.
These programs require synchronization; pausing is necessary.
SprutCAM has the sync points setup feature for this purpose. Sync points can be put anywhere in the NC code.

Maschinenzeitoptimierung
Evaluation and load balancing on each of the control channels.
Distribution of job between channels.
Werkzeugwegberechnung und -simulation
Hilfsoperationen
Sync points setup

Each MTM node works with a separate controller / channel, using its own program.
Therefore, it is necessary to create NC code for each machine controller / channel.
These programs require synchronization; pausing is necessary.
SprutCAM has the sync points setup feature for this purpose. Sync points can be put anywhere in the NC code.
Maschinenzeitoptimierung
Evaluation and load balancing on each of the control channels.
Distribution of job between channels.
Werkzeugwegberechnung und -simulation
Hilfsoperationen
Multichannel-Bearbeitungsbeispiele
Multichannel machining examples
Multichannel machining examples
Other solutions
Explore other cnc and robot programming solutions that SprutCAM offers
Daily posts from our clients all over the world
Postprocessor test for 5-axis milling
Postprocessor test for 5-axis milling from our Italian supplier
Designer collection of marble for the interior by KUKA robot
Using marble and a robot, you can create amazing projects even for interiors. Just look at the work of